Engineering surveys for industry
This book is the translated English version of a text on industrial surveys, originally published in Slovak by SPEKTRUM STU Publishing. This updated version is not only a translation of the original, but also a reviewed, extended version, which reflects up-to-date international standards and regulat...
Main Author: | Kopáčik, Alojz. |
---|---|
Other Authors: | Erdélyi, Ján., Kyrinovič, Peter., SpringerLink (Online service) |
Format: | eBook |
Language: | English |
Published: |
Cham, Switzerland :
Springer,
2020.
Cham, Switzerland : 2020. |
Physical Description: |
1 online resource. |
Subjects: |
Table of Contents:
- Intro
- Preface
- Contents
- List of Abbreviations
- About the Authors
- Chapter 1: Specific Conditions of Geodetic Measurements in Industry
- 1.1 Motivation
- 1.2 Environmental Conditions and Their Impact on Measurements
- 1.3 Safety Regulations of Industry Measurements
- 1.4 Accuracy Requirements of Industry Measurement
- Chapter 2: Quality of Industrial Measurements
- 2.1 Definitions and Terminology
- 2.2 Quality Evaluation of Industrial Measurements
- 2.3 Metrology of Industry Measurement
- 2.4 Geodetic Equipment and Instrument Testing and Evaluation
- References.
- Chapter 3: Maps and Information Systems of Industrial Plants
- 3.1 Large-Scale Base Maps
- 3.2 Factory Base Map Design and Creation
- 3.3 Factory Base Map Updating
- 3.4 Information Systems of Industrial Plants
- Chapter 4: Geodetic Networks of Industrial Equipment and Plants
- 4.1 Local Geodetic Networks of Industrial Plants
- 4.2 Geodetic Micro-Networks of Industrial Plants
- 4.3 Measurement of Angles in Micro-Networks
- 4.4 Measurement of Distances in Micro-Networks
- 4.5 Design of the Accuracy of Micro-Networks
- References.
- Chapter 5: Special Methods for Measurement of Industrial Equipment
- 5.1 Categorization of Methods
- 5.2 Methods of Direct Measurement
- 5.3 Methods of Non-direct Measurement
- 5.4 Measurement Systems for Precise Tilt Measurement
- References
- Chapter 6: Terrestrial Laser Scanning Systems
- 6.1 Functional Principle of TLS
- 6.1.1 Distance Measurement
- 6.1.2 Projection Mechanisms for Laser Beam Deflection
- 6.1.3 Categorization of Laser Scanners
- 6.2 Measurement Using Terrestrial Laser Scanners
- 6.2.1 Preparation for Scanning
- 6.2.2 Scanning.
- 6.3 Processing of Data Obtained by TLS
- 6.3.1 Point Clouds Adjustment
- 6.3.2 Creation of 3D Models
- 6.4 Accuracy and Calibration of Terrestrial Laser Scanners
- 6.4.1 Source of Errors and their Mathematical Models
- 6.4.2 Calibration of Terrestrial Laser Scanners
- 6.4.3 Laboratory Tests of Laser Scanners
- 6.4.4 Field Tests of Terrestrial Laser Scanners
- References
- Chapter 7: Coordinate Measuring Systems and Machines
- 7.1 Principle of Coordinate Measuring Machines
- 7.2 Categorization of CMMs
- 7.3 Polar CMMs
- 7.4 Orthogonal CMMs
- 7.5 Probing Systems of CMMs.
- 7.6 Accuracy and Testing of CMMs
- References
- Chapter 8: Setting-Out and Measurement of Cranes and Crane Runways
- 8.1 Basic Terms and Definitions
- 8.2 Classification of Cranes
- 8.3 Crane and Crane Runway Parameters
- 8.4 Methods of Setting-Out and Measurement of Cranes and Crane Runways
- 8.5 Data Processing and Analysis
- 8.6 Automated Measurement of Rails
- References
- Chapter 9: Setting-Out and Control of Rotary Kilns
- 9.1 Conditions of the Correct Rotary Kiln Operation
- 9.2 Geodetic Works Related to Rotary Kiln Assembly.