Search Results - (( Atmospheric position ) OR ((( Atmospheric decomposition ) OR ((((( Atmospheric (((decompositive OR decomposition) OR decompposition) OR decompositie) ) OR ( Atmospheric compositions ))) OR ( Atmospheric compositive ))))))*

Characterization of minerals, metals, and materials 2017 by Characterization of Minerals, Metals, and Materials (Symposium) San Diego, Calif.), Minerals, Metals and Materials Society. Annual Meeting

Contents: “…Part 1: Soft Materials -- Charpy Toughness Behavior of Fique Fabric Reinforced Polyester Matrix Composites -- Comparative Analysis of Curaua Fiber Density Using the Geometric Characterization and Pycnometry Technique -- Izod impact tests in polyester matrix composites reinforced with blanket of the malva and jute fibers -- Tensile Behavior of Epoxy Matrix Composites Reinforced With Eucalyptus Fibers -- The dimensional characterization of jute fabric strips for reinforcement in composite polymeric -- Izod Toughness Behavior of Continuous PALF Fibers Reinforced Polyester Matrix Composites -- Mechanical, thermal, morphology and barrier properties of flexible film based on polyethylene-ethylene vinyl alcohol blend reinforced with graphene oxide -- Radiation Effects on Crosslinking of Butyl Rubber Compounds -- Part 2: Clays and Ceramics -- Effect of Skin-Core Hierarchical Structure on Dielectric Constant of Injection Molded and Cast Film Extruded Liquid Crystalline Polymer -- Aging behaviour in Ni0.5CoxMn2.5-xO4 (x=0.5, 0.8 and 1.1) thermistors -- Adsorption of lead from aqueous solutions to bentonite and composite -- Part 3: Electronic, Magnetic, Environmental, and Advanced Materials -- Characterization Of Low-Zinc Electric Arc Furnace Dust -- GAMMA-RADIATION EFFECT ON BIODEGRADABILITY OF SYNTHETIC PLA STRUCTURAL FOAMS PP/HMSPP BASED -- STUDY OF FLEXIBLE FILMS PREPARED FROM PLA/PBAT BLEND AND PLA e-BEAM IRRADIATED AS COMPATIBILIZING AGENT -- Synthesis of ZnO Micro Prisms on Glass Substrates by the Spray Pyrolysis Method -- Part 4: Nano Materials -- Electrical and microstructural investigation of Ni0.5Co0.5Cu0.3Zn0.3Mn1.4O4 temperature sensors -- Enhanced physical properties of thin film nanocomposites -- A study on the size and type of inclusions in Si-Mn combined deoxidated low carbon steel strip -- Effect of Argon Gas Purging of Spark Plasma Sintered ZrB2+SiC Nano-powder Composites -- Part 5: Alloys -- Investigating the Anisotropic Behaviour of Lean Duplex Stainless Steel 2101 -- MICROSTRUCTUAL INVESTIGATION AND IMPACT TESTING OF ADDITIVE MANUFACTURED TI-6AL-4V -- Part 6: Powders and Foams -- SYNTHESIS OF TiN NANO-COMPOSITE POWDER BY HIGH-ENERGY BALL MILLING OF TiH2 UNDER NITROGEN ATMOSPHERE -- Application of AFM in Morphology Determination of Powder Material -- Effects of Thermal Processing on Closed-Cell Aluminium Foams -- Experimental Investigation of Mechanical Behaviour of Closed-Cell Aluminium Foams under Drop Weight Impact -- Deformation Mechanisms of Closed Cell-Aluminium Foams during Drop Weight Impact -- Part 7: Minerals -- INDUSTRIAL USE OF BRAZILIAN BENTONITE MODIFIED BY MILD ACID ATTACK -- Mullitization Characteristics and Sinterability of Kyanite in Ceramic Preparation -- Ore Dressing and Technological characterization of Palygorskite from Piauí/Brazil for applications as adsorbent of heavy metals -- TECHNOLOGICAL CHARACTERIZATION OF WASTE FROM GOLD MINING DAM -- Synthesis and Characterization of Sodalite and Cancrinita from Kaolin -- Part 8: Ferrous Metals -- Effects of Alumina and Magnesia on Microstructure and Mineralogy of Iron Ore Sinter -- Isothermal Reduction Kinetics of CaO·2Fe2O3 by Thermogravimetric Analysis -- Phase Transformation of MnO2 and Fe2O3 Briquettes Roasted Under CO-CO2 Atmospheres -- Contact Angle of Iron Ore Particles with Water: Measurements and Influencing Factors -- Important Factors to Consider in FIB Milling of Crystalline Materials -- Part 9: Material Processing and Corrosion -- Corrosion Behavior of Super-Ferritic Stainless Steels in NaCl media -- Effect of bromide ions on the pitting corrosion of hafnium in anhydrous t-butanol and acetonitrile -- Compression Behavior of Semi-Closed Die Forged AZ80 Extrusion -- Nondestructive Characterization of Microstructures of Heat-Treated Steels by Magnetic Barkhausen Noise Technique -- Part 10: Method Development -- Development of A New Recycling Process of PGM from Metal-supported Catalyst Using Complex Oxide -- Part 11: Composites -- High thermal conducting composites using percolation theory -- SORPTION CHARACTERISTICS OF LOW DENSITY POLYETHYLENE/KOLA NUT COMPOSITE -- Residual Stress Analysis within Steel Encapsulated Metal Matrix Composites Via Neutron Diffraction -- Tensile Behavior of Epoxy Matrix Composites Reinforced With Pure Ramie Fabric -- Hemp Fiber Density Using the Pycnometer Technique -- Preparation and Characterization of Clay Exfoliation and Vegetal fibre on Properties of Recycled Low Density Polyethylene (rLDPE) -- Part 12: Ferrous Metals -- Estimation of Dislocation Density in Metals from Microhardness Test -- Part 13: Welding and Solidification -- Interfacial strength characterization in a high-modulus low-density steel-based Fe-TiB2 composite -- Part 14: Materials Extractions -- Leaching of Copper-Cobalt Tailings from the Democratic Republic of Congo -- OPTIMUM OPERATING CONDITIONS FOR EXTRACTION OF LIGNIN PRECURSORS FROM PALM FRUIT BUNCH -- SELECTION ON THE PROCESS FOR ENRICHING GOLD FROM REFRACTORY GOLD ORES BY SMELTING -- SELECTION ON THE PROCESS FOR REMOVING AND RECOVERING ANTIMONY FROM ANTIMONIAL REFRACTORY GOLD ORES -- Upgrading of Copper and Cobalt from the Democratic Republic of Congo Tailings -- CHARACTERIZATION OF SPENT PRINTED CIRCUIT BOARDS FROM COMPUTERS -- Study of the Effect of the Initial Nucleation Mechanism of Lead Anode Oxidation Film on Internal Stress in Chromic Acid Electrolyte -- Part 15: Poster Session -- Addition of Cellulose Nanofibers in Reactive Powder Concrete -- ADVANCED ION COLUMN SOLUTION FOR LOW ION DAMAGE CHARACTERIZATION AND ULTRA-FINE PROCESS -- Application of Membrane Separation Technology in Wastewater Treatment of Iron and Steel Enterprise -- Brillouin Scattering Study on Elastic Properties of Bulk hcp ZnO Single Crystal -- Characteristics of stamp charging coke and top charging coke -- Characterization and leaching proposal of Ag ( I) from a Zn concentrate -- Characterization and Mechanical Properties of Additively Manufactured Stainless Steel 316L -- CHARACTERIZATION OF MERCURY JAROSITE -- Characterization of steel production dust and their use in structural ceramics -- CHARPY TOUGHNESS BEHAVIOR OF JUTE FABRIC REINFORCED POLYESTER MATRIX COMPOSITES -- Chemical and Mineralogical Characterization of a Mixed Sulphide Ore at Zimapan, Hidalgo -- Contribution to the ß relaxation study of the HDPE, LDPE and LLDPE -- Determination of Ten Impurity Elements in Tin Concentrate and Smelting Products by ICP-AES -- Effects of wet grinding on the structure and granularity of biological origin aragonite and its polymorphic transformation into calcite -- EVALUATION OF BALLISTIC ARMOR BEHAVIOR WITH EPOXY COMPOSITE REINFORCED WITH MALVA FIBERS -- EVALUATION OF THE POZZOLANIC ACTIVITY OF RESIDUE FROM THE PAPER INDUSTRY -- EVALUATION OF THE PROPERTIES OF THE ADHESIVE MORTAR IN THE FRESH STATE WITH ADDITION OF GLASS WASTE -- Experimental Evaluation of the Influence of Mortar?…”
SpringerLink - Click here for access

7th International Symposium on High-Temperature Metallurgical Processing : proceedings of a symposium sponsored by the Pyrometallurgy Committee of the Extraction and Processing Div... by International Symposium on High-Temperature Metallurgical Processing Nashville, Tenn., Minerals, Metals and Materials Society. Annual Meeting

Contents: “…Copper Smelting in an Outotec® Ausmelt TSL Furnace with a UCAR® ChillKote™ Refractory System -- Enrichment of Gold in Low Grade Copper Matte from Arsenical Refractory Gold Concentrate via Matte Smelting Method -- Zinc and Refractories -- A Nasty Relation -- Preliminary Study on Preparation of Al-Sc Master Alloy in Na3AlF6-K3AlF6-AlF3 Melt -- Effect of the Reductants on the Production of Iron Based Alloys from Mill Scale by Metallothermic Process -- Experimental Study on Iron-Based Alloy as Cladding Layer-Improving High Temperature Oxidation Resistance of Furnace Alloy -- Production of FeMn Alloys with Heat Treated Mn-Nodules -- Thermodynamic Analysis and Experiments on Vacuum Separation of Sn-Sb Alloy -- Simulation of Solidification Microstructure of 30Cr2Ni4MoV Steel Ingot under Different Intensities of Mechanical Oscillation -- Production of ZrB2-B4C Composite Materials via SHS Process -- Research on Microwave Roasting of ZnO and Application in Photocatalysis -- Reduction Kinetics of Hematite Concentrate Particles by CO+H2 Mixture Relevant to a Novel Flash Ironmaking Process -- SO3 Formation in Copper Smelting Process: Thermodynamic Consideration -- Effect of Oxidation on Wetting Behavior between Silicon and Silicon Carbide -- Effect of CaO/SiO2 and P2O5 on the Viscosity of FeO-SiO2-V2O3-CaO-P2O5 Slags -- Heat Losses to Furnace Coolers as a Function of Process Intensity -- Viscosity of Partially Crystallized BOF Slag -- Origin and Evolution of Non-Metallic Inclusions for Al-Killed Steel during EAF-LF-VD-CC Process -- The Dynamic Dissolution of Coke with Slag in Melting and Dropping Zone -- Research on Oxidation Kinetics of SPHC Steel at 500̃900°C -- Experiment Research on Direct Reduction of Celestine by Rotary Hearth Furnace Process -- Influence of Slag Basicity on the Silicon Within the Stainless Steel Master Alloy Prepared by Smelting Reduction of Fe-Ni-Cr Sinters -- Reduction Behavior of Chromic Oxide in Ti-Bearing BF Slag -- Effects of Mineral Oxides on the Precipitation Micro-Morphology of Metallic Iron in the Reduction of Iron Oxides Under CO Atmosphere -- Influence of Operation Parameters on Mass Fraction of Sulfur in the Hot Metal in COREX Process -- Influence of Operation Parameters on Sticking Behavior of Pellets in COREX Shaft Furnace -- Relationship between Coking Properties of Lump Coal and its Pulverization in COREX Process -- Thermogravimetric Analysis of Coal Used in Rotary Kiln of Iron Ore Oxide Pellet -- Enhancing the Removal of Sodium and Potassium of Sinter by CO-Containing Flue Gas Circulation Sintering Process.…”
SpringerLink - Click here for access

Energy technology 2017 : carbon dioxide management and other technologies by Energy Technologies Symposium San Diego, Calif., Minerals, Metals and Materials Society. Annual Meeting

Contents: “…The success story of AOS -- Part 2: Energy Technologies: CO2 Management and Sustainable Metallurgical Processes -- Transforming the way electricity is consumed during the aluminium smelting process -- The thermodynamics of slag forming inorganic phases in biomass combustion processes -- Leaching of Sb from TROF furnace Doré Slag -- Potential CO2 emission reduction and H2 production using industrial slag wastes originating from different industrial sectors -- Part 3: Energy Technologies: Novel Technologies -- Modeling Anthropogenic Heat Flux in Climate Models -- In-situ microscopic study of morphology changes in natural hematite and Cu-spinel particles during cyclic redox gas exposures for chemical looping applications -- Thermodynamic stability of condensed phases in the ternary system CaO-Cu-O by the EMF method -- Experimental Study on Electro-spraying of Ethanol Based on PDA Measurement -- Part 4: Energy Technologies: Heat Recovery -- Integrated utilization of sewage sludge and coal gangue in clinker manufacture -- Valuable metals and energy recovery from electronic waste streams -- Dry Granulation of Hot Metal and Heat Recovery from Off-Gas -- Energy Recovery of Livestock Waste in Taiwan -- Life cycle assessments of incineration treatment for sharp medical waste -- Part 5: Energy Technologies: Poster Session -- Effect of granularity on pretreatment of coke with microwave irradiation -- Effect of Microwave and ultrasonic coupling treatment on granularity and microstructure of Pulverized Coal -- Influence of Sodium on Coke Microstructure in Different Reaction Atmosphere -- Part 6: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste I -- Maximizing the values of steelmaking slags -- Recycling of zinc from the steelmaking dust in the sintering process -- Direct Preparation of Metal Doping Ni-Zn Ferrite from Zn-containing Electric Arc Furnace Dust by Calcination Method -- Part 7: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste II -- Synthesis and Characterization of Ferrochromium Slag Based Glass-ceramics -- Hydrometallurgical processing of copper smelter dust for copper recovery as nanoparticles: a review -- Part 8: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste III -- Chromium removal from iron-rich waste generated during processing lateritic nickel ores -- Removal of Magnesium from Liquor Produced by Nickel Mining by Crystallization -- Synthesis of Magnesium Oxide from Ferronickel Smelting Slag through Hydrochloric Acid Leaching-Precipitation and Calcination -- Thermodynamic analysis of the recycling of aircraft Al alloys -- Lithium-ion Battery Recycling Through Secondary Aluminum Production -- Part 9: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Poster Session -- Alternative method for materials separa-tion from crystalline silicon photovoltaic modules -- Bioleaching process for metal recovery from waste materials -- Chemical Analysis of Sludge Originating from Industrial Painting Performed in Brazil -- Preparing ferrosilicon alloy with copper slag -- Research on Optimization of Sintering Mixture with Low-grade Complex Ore -- Part 10: Solar Cell Silicon: Silicon Production, Crystallization, and Properties -- Study on Producing Solar Grade Silicon by Carbothermal Reduction of Andalusite Ore -- Phase Analysis of the Si-O2 System -- Characterization of Composition, Morphology, and Structure of Disi Raw Sandstones in Jordan -- Part 11: Solar Cell Silicon: Silicon Impurity Removal and Refining -- Effect of magnesium addition on removal of impurities from silicon by hydrometallurgical treatment -- Evaporation removal of boron in molten silicon using reactive fluxes -- Part 12: Solar Cell Silicon: Silicon Photovoltaics -- Electrodynamic Eddy Current Separation of End-of-Life PV Materials -- Investigation on Quartz Crucibles for Monocrystalline Silicon Ingots for Solar Cells -- Influence of Oxygen Content on the Wettability of Silicon on Graphite -- Particle Separation in Silicon Ingot Casting Using AC Magnetic Field -- Part 13: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: Advances in Environmental Technologies: Characterization and Uncertainty -- Characteristics of Municipal Solid Waste Incineration Bottom Ash with Particulate Matters PM2.5 ̃PM10 -- Part 14: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: New Areas of Value Recovery -- Accelerating life-cycle management protocols for new generation batteries -- Recovery of Metals and Nonmetals from Waste Printed Circuit Boards (PCBs) by Physical Recycling Techniques -- The use of rice husk ash as an aggregate for foundry sand mould production -- Part 15: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: Poster Session -- Chemical reduction of Fe(III) in nickel lateritic wastewater to recover metals by ion exchange -- Chronopotentiometry applied to the determination of copper transport properties through a cation-exchange membrane -- Effect of flow rate on metals adsorption of synthetic solution using chelating resin Dowex XUS43605 in column experiments.…”
SpringerLink - Click here for access

TMS 2018 147th Annual Meeting & Exhibition supplemental proceedings by Minerals, Metals and Materials Society. Annual Meeting, Minerals, Metals and Materials Society

Contents: “…Nanocomposites V: Structure-Property Relationships in Nanostructured Materials -- Carbon Nanocomposite for Reliable Seal Applications in High- temperature, High-pressure, Corrosive Environments -- The Dielectric Behavior in Reduced Graphene Oxide /Polymer Composites with a Segregated Structure -- Part 32. Phase Transformations and Microstructural Evolution -- Solid State Phase Transformation Mechanism in High Carbon Steel under Compressive Load and with Varying Cr Percent -- Microstructure Characterization of Aged Heat Resistant Steels -- Sublimation and Self Freezing of Planar Surfaces in Rarefied Atmospheres -- Effect of Precipitation on Creep Properties of Ferritic Steels -- Microstructural Evolution of a New Beta Titanium Alloy during the Beta Annealing, Slow Cooling and Aging Process -- Part 33. …”
SpringerLink - Click here for access