I 28.26/6:10
|
Behavior of coal-gas reservoirs |
1 |
I 28.26/6:11
|
Design and development of drill equipment |
1 |
I 28.26/6:12
|
Gas migration characteristics of coalbeds |
1 |
I 28.26/6:13
|
Use of vertical boreholes for assisting ventilation of longwall gob areas |
1 |
I 28.26/6:14
|
Sorption investigations of methane on coal |
1 |
I 28.26/6:15
|
Development of recording methanometers and recording anemeters for use in underground coal mines |
1 |
I 28.26/6:16
|
Experimental in situ retorting of oil shale at Rock Springs, Wyo |
1 |
I 28.26/6:17
|
Personal respirable dust sampler |
1 |
I 28.26/6:18
|
Effect of lowering the tin content of secondary red brass |
1 |
I 28.26/6:20
|
Recovering gold from stripping waste and ore by percolation cyanide leaching |
1 |
I 28.26/6:23
|
Gas flood efficiency improvement by polymer injection |
1 |
I 28.26/6:24
|
A process to make high-BTU gas from coal |
1 |
I 28.26/6:25
|
Conversion of urban refuse to oil |
1 |
I 28.26/6:26
|
Electrolytic oxidation of cinnabar ores for mercury recovery |
1 |
I 28.26/6:30
|
Some results from the operation of a 150-ton oil shale retort |
1 |
I 28.26/6:32
|
An evaluation of the respirable dust sampling program in United States underground coal mines |
1 |
I 28.26/6:35
|
Low-sulfur fuel oil from coal |
1 |
I 28.26/6:38
|
Natural gas storage with zeolites |
1 |
I 28.26/6:39
|
Rock burst research at the Galena Mine, Wallace, Idaho |
1 |
I 28.26/6:40
|
Fuel additives and automobile exhaust emission |
1 |