I 28.23:9215
|
Instrumentation and modeling of the north 140 section of Magmont Mine, Bixby, MO |
1 |
I 28.23:9216
|
Supercritical CO₂ solubility of TiCl |
1 |
I 28.23:9217
|
Methods of evaluating explosive reactivity of explosive-contaminated solid waste substances |
1 |
I 28.23:9218
|
Thermal characteristics of energized coal mine trailing cables |
1 |
I 28.23:9219
|
Computer simulation of face ventilation to dilute high methane concentrations developed by blasting oil shale |
1 |
I 28.23:9220
|
Two-leg longwall shield mechanics |
1 |
I 28.23:9221
|
Basic parameters of conveyor belt cleaning |
1 |
I 28.23:9222
|
Acid sulfation of alunite |
1 |
I 28.23:9223
|
Respirable dust sources and controls on continuous auger mining sections |
1 |
I 28.23:9224
|
Foundation response to subsidence-induced ground movements : a case study |
1 |
I 28.23:9225
|
Causes and control of coal mine bumps |
1 |
I 28.23:9226
|
Comparative study of blasting vibrations from Indiana surface coal mines |
1 |
I 28.23:9227
|
Zero-surface-charge-controlled drilling for enhanced penetration and extended bit life |
1 |
I 28.23:9228
|
Microseismic data analysis of failure occurrence in a deep, western U.S. coal mine : a case study |
1 |
I 28.23:9229
|
Intercomparison of North American radon progeny measurement methods and equipment |
1 |
I 28.23:9230
|
Effectiveness of organic binders for iron ore pelletization |
1 |
I 28.23:9231
|
In situ measurements and preliminary design analysis for deep mine shafts in highly stressed rock |
1 |
I 28.23:9232
|
Improved method for determination of helium-4 in helium-3 by mass spectrometry |
1 |
I 28.23:9233
|
Respirable dust generation : comparison of continuous and conventional mining methods when excavating rock in coal mines |
1 |
I 28.23:9234
|
Capillary wetting response of coal after exposure to ambient air atmosphere |
1 |