Advances in micro and nano manufacturing and surface engineering proceedings of AIMTDR 2021 /

Show other versions (3)

This book presents select proceedings of the 8th International and 29th All India Manufacturing Technology, Design, and Research Conference (AIMTDR 2021). It discusses the latest advances in miniature manufacturing, machining of miniature components, surface engineering, nanomaterials, nanotechnolog...

Full description

Saved in:
Bibliographic Details
Corporate Authors: All India Manufacturing Technology Design and Research Conference India, SpringerLink (Online service), All India Manufacturing Technology Design and Research Conference, International
Other Authors: Bhattacharyya, Bijoy, Mathew, Jose, Saravanakumar, N., Rajeshkumar, G.
Format: Conference Proceeding eBook
Language:English
Published: Singapore : Springer, 2022.
Singapore : 2022.
Series:Lecture notes in mechanical engineering.
Physical Description:
1 online resource (361 pages).
Subjects:
Micromachining -- Congresses.
Nanotechnology -- Congresses.
Nanostructured materials industry -- Congresses.
Online Access:SpringerLink - Click here for access

MARC

LEADER 00000cam a2200000 a 4500
001 on1344542125
003 OCoLC
005 20240223121953.0
006 m o d
007 cr un|---aucuu
008 220917s2022 si o 100 0 eng d
019 |a 1344421621 
020 |a 9789811945717  |q (electronic bk.) 
020 |a 9811945713  |q (electronic bk.) 
020 |z 9811945705 
020 |z 9789811945700 
024 7 |a 10.1007/978-981-19-4571-7  |2 doi 
035 |a (OCoLC)1344542125  |z (OCoLC)1344421621 
040 |a EBLCP  |b eng  |c EBLCP  |d GW5XE  |d YDX  |d EBLCP  |d OCLCF  |d OCLCQ  |d WSU  |d OCLCO 
049 |a COM6 
050 4 |a TJ1191.5 
072 7 |a TGP  |2 bicssc 
072 7 |a TEC009060  |2 bisacsh 
072 7 |a TGP  |2 thema 
082 0 4 |a 671.3/5  |2 23/eng/20220926 
111 2 |a All India Manufacturing Technology Design and Research Conference  |0 https://id.loc.gov/authorities/names/no99065497  |n (29th :  |d 2021 :  |c India) 
245 1 0 |a Advances in micro and nano manufacturing and surface engineering :  |b proceedings of AIMTDR 2021 /  |c Bijoy Bhattacharyya, Jose Mathew, N. Saravanakumar, G. Rajeshkumar, editors. 
246 3 |a AIMTDR 2021. 
260 |a Singapore :  |b Springer,  |c 2022. 
264 1 |a Singapore :  |b Springer,  |c 2022. 
300 |a 1 online resource (361 pages). 
336 |a text  |b txt  |2 rdacontent. 
337 |a computer  |b c  |2 rdamedia. 
338 |a online resource  |b cr  |2 rdacarrier. 
490 1 |a Lecture Notes in Mechanical Engineering. 
505 0 |a Intro -- AIMTDR 2021 Conference Core Organizing Committee -- Foreword -- Contents -- About the Editors -- Prediction of Machining Quality and Tool Wear in Micro-Turning Machine Using Machine Learning Models -- 1 Introduction -- 2 Experimental Study -- 2.1 Speed Control -- 2.2 Cutting Tool -- 2.3 Vibration Measurement -- 2.4 Surface Roughness Measurement -- 2.5 Tool Flank Wear Measurement -- 3 Machine Learning Models -- 3.1 Multilayer Perceptron -- 3.2 Random Forest (RF) -- 3.3 Regression Trees -- 3.4 Radial-Based Functions (RBF) -- 4 Results and Discussion -- 5 Conclusions -- References. 
505 8 |a Plasma Characterization in Ultrasonic Vibration-Assisted Micro-Electrical Discharge Machining (µ-EDM) -- 1 Introduction -- 2 Ultrasonic Vibration-Assisted EDM -- 3 Experiment Performed -- 4 Plasma Temperature and Density -- 4.1 Analysis of the Spectrum -- 4.2 Calculation of Plasma Temperature -- 4.3 Electron Density Calculation -- 5 Results and Discussions -- 5.1 Plasma Temperature -- 5.2 Electron Density -- 5.3 Effect of Ultrasonic Vibration -- 6 Conclusions -- References -- Effect of Process Parameters on Accuracy of Holes Drilled on Quartz by Micro-USM -- 1 Introduction. 
505 8 |a 2 Experimental Setup Details and Planning -- 3 Measurement of Responses -- 3.1 Measurement of Overcut -- 3.2 Measurement of Taper Angle -- 4 Results and Discussion -- 4.1 Variation of Overcut with Process Parameters -- 4.2 Variation of Taper Angle with Process Parameters -- 5 Conclusions -- References -- Influence of Vibration in the Nozzle Frame on the Ribbon Characterization in Planar Flow Melt Spinning Process -- 1 Introduction -- 2 Experimental -- 3 Results and Discussion -- 4 Conclusion -- References. 
505 8 |a Experimental Investigation into Wire Electrochemical Micro-Machining for Reduction of MicroSparks and Overcut -- 1 Introduction -- 2 Experimental Setup -- 3 Experimental Planning -- 4 Results and Discussion -- 4.1 Influence of Feed Rate on MicroSpark and Overcut -- 4.2 Influence of Machining Voltage on MicroSpark and Overcut -- 4.3 Influence of Voltage Pulse Frequency on MicroSpark and Overcut -- 4.4 Influence of PZT Tool Vibration Frequency on a Micro Spark -- 4.5 Influence of PZT Vibration Amplitude on Micro-Sparks -- 5 Controlled Parametric Micro-Slit Fabrication -- 6 Conclusions -- References. 
505 8 |a Influence of Voltage Pulse on Machining Accuracy in Electrochemical Micromachining -- 1 Introduction -- 2 Influence of Voltage Pulse on Machining Accuracy -- 2.1 Control of Micro-Tool Feed Rate -- 3 Experimental EMM SetUp -- 4 Experimental Planning -- 5 Experimental Result Analysis -- 6 Conclusions -- References -- A Study on the Influence of Cutting Tool Geometry on the Temperature of the Workpiece in Nanometric Cutting of Silicon -- 1 Introduction -- 2 MD Simulation -- 3 Modeling -- 4 Results and Discussion -- 4.1 Analysis of Temperature During Machining. 
500 |a 4.2 Analysis of Temperature During Machining. 
520 |a This book presents select proceedings of the 8th International and 29th All India Manufacturing Technology, Design, and Research Conference (AIMTDR 2021). It discusses the latest advances in miniature manufacturing, machining of miniature components, surface engineering, nanomaterials, nanotechnology, industry 4.0, optimization techniques, micro-electric discharge machining, electrochemical micro-machining, thin films, optimization of micro-machining process parameters, machining of nano-composites, characterization using atomic force microscopy, micro tool fabrications, characterization of nano-composites, surface roughness analysis, tribological performance of surface coated materials, and sustainability in manufacturing. The contents of this book are useful for students, researchers, and as well as industry professionals working in the various areas of mechanical engineering. 
650 0 |a Micromachining  |v Congresses.  |0 https://id.loc.gov/authorities/subjects/sh2008107749. 
650 0 |a Nanotechnology  |v Congresses.  |0 https://id.loc.gov/authorities/subjects/sh2008108196. 
650 0 |a Nanostructured materials industry  |0 https://id.loc.gov/authorities/subjects/sh2004007347  |v Congresses.  |0 https://id.loc.gov/authorities/subjects/sh99001533. 
650 6 |a Micro-usinage  |v Congrès. 
650 6 |a Nanotechnologie  |v Congrès. 
650 6 |a Nanomatériaux  |x Industrie  |v Congrès. 
650 7 |a Micromachining.  |2 fast. 
650 7 |a Nanostructured materials industry.  |2 fast. 
650 7 |a Nanotechnology.  |2 fast. 
655 7 |a proceedings (reports)  |2 aat. 
655 7 |a Conference papers and proceedings.  |2 fast. 
655 7 |a Conference papers and proceedings.  |2 lcgft  |0 https://id.loc.gov/authorities/genreForms/gf2014026068. 
655 7 |a Actes de congrès.  |2 rvmgf. 
700 1 |a Bhattacharyya, Bijoy.  |0 https://id.loc.gov/authorities/names/no2016005753. 
700 1 |a Mathew, Jose.  |0 https://id.loc.gov/authorities/names/no2006067733. 
700 1 |a Saravanakumar, N. 
700 1 |a Rajeshkumar, G. 
710 2 |a SpringerLink (Online service)  |0 https://id.loc.gov/authorities/names/no2005046756. 
711 2 |a All India Manufacturing Technology Design and Research Conference, International  |n (8th :  |d 2021 :  |c India) 
776 0 8 |i Print version:  |a Bhattacharyya, Bijoy  |t Advances in Micro and Nano Manufacturing and Surface Engineering  |d Singapore : Springer,c2022  |z 9789811945700. 
830 0 |a Lecture notes in mechanical engineering.  |0 https://id.loc.gov/authorities/names/no2013039484. 
907 |a .b65983920  |b multi  |c -  |d 230206  |e 240401 
998 |a (2)cue  |a cu  |b 240227  |c m  |d z   |e -  |f eng  |g si   |h 0  |i 2 
948 |a MARCIVE Overnight, in 2024.03 
948 |a MARCIVE Comprehensive, in 2023.03 
933 |a Marcive found issue: "700 1   |a Rajeshkumar, G." 
933 |a Marcive found issue: "700 1   |a Saravanakumar, N." 
933 |a Marcive found issue: "711 2   |a All India Manufacturing Technology Design and Research Conference, International  |n (8th :  |d 2021 :  |c India)" 
994 |a 92  |b COM 
995 |a Loaded with m2btab.ltiac in 2024.03 
995 |a Loaded with m2btab.elec in 2024.02 
995 |a Loaded with m2btab.ltiac in 2023.03 
995 |a Loaded with m2btab.elec in 2023.02 
995 |a Loaded with m2btab.auth in 2023.03 
995 |a Loaded with m2btab.auth in 2024.03 
999 |e z 
999 |a cue 
989 |d cueme  |e  - -   |f  - -   |g -   |h 0  |i 0  |j 200  |k 240227  |l $0.00  |m    |n  - -   |o -  |p 0  |q 0  |t 0  |x 0  |w SpringerLink  |1 .i150811913  |u http://ezproxy.coloradomesa.edu/login?url=https://link.springer.com/10.1007/978-981-19-4571-7  |3 SpringerLink  |z Click here for access 

Similar Items